Construction
160 x 180mm (6.3in. x 7 in.) electroplated I-beam steel construction bolted onto 20mm (0.8in.) thick end plates.
|
Physical Dimensions
Scanner Width: 6800mm (268in.) max
Beam Width: 6000mm (236in.) max
Machine-Direction: 372mm (14.6in.)
With three sensors at 0º pass angle: 600mm (23.6in.)
Scanner height: 1170mm (46in.)
Weight: 1000kg plus 100kg/m
(2000lbs plus 100lbs per ft)
|
Maximum Sheet Width
5100mm (200in.)
|
Scanning Speed
Scanning speed is governed by an inverter assuring smooth operation of the heads. Normal scanning speed is 100-200mm/s (4in./s) |
Head Positioning
The heads use web edge detectors to seek out the web and automatically adjust for width and web position changes.
|
Single-Point Positioning Accuracy
+ 3mm (+ 0.12in.)
|
Maximum Ambient Temperature
55 ºC (130 F) standard
|
Power Requirement
110-230 VAC, 50/60 Hz, 1 kW
|
Drive Belt
Steel reinforced polyurethane timing belt.
|
Scanner Drive
120W AC motor with heavy duty toothwheel gear box.
|
Guiding system
10 large diameter 80mm (3.15in.) neoprene covered wheels supported by a machined and tempered I-beam.
|
Instrument Air
6 bars (90psi) oilfree (0.01 µm filter) 100 l/min.
|
